Drag to turn, scroll or pinch to zoom. Grid squares are 10 mm.
Building the model…
All generators › Gears and drives
Ring gear maker
A casing with teeth inside, and the gear that runs in it.
About the ring gear maker
Set the outside size of the casing and the number of teeth, and get a ring gear with the teeth on the inside. Add an inner gear and it is shown in place, with the shaft offset worked out.
- Any gear with the same module and at least 8 fewer teeth fits inside.
- Mounting holes can match NEMA motors or sit on any bolt circle.
- Add a back plate to close one side.
Everything runs in your browser: nothing is uploaded and there is no sign-up.
More generators
Gear maker
Spur, helical and herringbone gears with real involute teeth.
Gear pair maker
Two gears that mesh, from the shaft spacing and the ratio you need.
Planetary gear maker
Sun, planets, ring and carrier that fit your casing and ratio.
Print-in-place planetary gear maker
A gear set that comes off the bed already assembled.
Harmonic drive maker
A strain wave gear with a printed flexible cup.
Timing-belt harmonic drive maker
A harmonic drive that uses a timing belt as the flexible part.
Timing pulley maker
GT2, HTD, XL, MXL and T-series pulleys with any tooth count.
Print-in-place bearing maker
Roller bearings that print already assembled.